Onda Lifting at Kkeut Oriental Clinic, why is it special?

1. Pre-treatment Design + Handpiece Strategy Planning

At Kkeut Oriental Clinic, the director personally designs the lifting treatment. We carefully identify areas needing elasticity improvement and contouring, precisely allocating 3mm / 7mm handpieces. We avoid areas prone to hollowness and focus intensely on areas requiring tightening.

2. Adequate Energy Delivery

Energy settings can be adjusted from 60,000 to 120,000 joules for the face, and it's not just about applying a lot; a customized design is made to suit the patient's skin condition and goals.

3. Skilled Speed Control

Onda is a device whose effectiveness varies with handpiece speed. Kkeut Oriental Clinic adjusts the speed slowly for areas requiring heat accumulation and quickly for sensitive areas, ensuring maximum effect without overheating.

4. Customized Shot Distribution by Area

Beyond simply using 3mm/7mm handpieces, we precisely distribute shots according to the patient's volume and fat distribution. For example, for patients with very little fat, we focus on 3mm, while for those with more fat in the double chin or lower face, we increase the proportion of 7mm.

The Subtle Difference of Onda Lifting

At Kkeut Oriental Clinic, during Onda Lifting treatment, rather than proceeding only at 90W from the start,

we use a method of quickly raising the temperature with an initial high output of 100-110W, then maintaining it at 90W.

The Subtle Difference in Kkeut Oriental Clinic's Treatment Method!

Reduced Time to Reaction Point:

Even with the same total energy applied, starting with high output raises tissue temperature faster.

This means the time to reach the energy accumulation zone is shortened,

and thus, the skin begins to react sooner.

Minimizing Energy Loss in the Core Reaction Zone:

High-output, short-duration application can reach the required temperature before heat spreads to surrounding areas,

allowing for a dermal and fat layer-focused reaction without epidermal damage.

High Efficiency Compared to Short Treatment Time:

If treatment is performed only at 90W, it takes longer to reach the reaction zone,

and more joules may need to be applied to create a sufficient thermal reaction.

On the other hand, a high-output start achieves the required heat within a short time,

and subsequent output adjustment ensures safety.

Differences Felt by the Patient:

▶ Compared to 90W-only treatment

→ The lifting effect is felt sooner,

→ The feeling of skin tightening firmly immediately after treatment is more pronounced.

Furthermore, since the output is adjusted before the heat sensation exceeds a certain level,

→ Pain or discomfort during treatment does not excessively increase.

Consequently, even with the same 60,000 joules, depending on the output adjustment,

the results can be completely different,

and Kkeut Oriental Clinic demonstrates that difference through results.

Features of Onda Lifting

Lifting and Tightening Simultaneously

Onda Lifting is a next-generation premium lifting device that uses ultra-shortwave microwaves (2.45GHz) to deliver heat to the dermis and subcutaneous fat layers, achieving both lifting and tightening effects simultaneously.

Operating on the principle of vibrating water molecules like a microwave oven to generate frictional heat, it induces collagen contraction and production, as well as fat cell destruction, a key feature enabling immediate lifting effects.

Microwaves have the characteristic of being absorbed by water in the skin to generate heat, allowing them to selectively deliver strong stimulation to the dermis and subcutaneous fat layers without irritating the epidermis.

Unlike other lifting devices, Onda's advantage is its ability to simultaneously achieve lifting and tightening with a single device.

Lifting focuses on contouring, while tightening focuses on skin texture and elasticity. Onda is designed to address both of these simultaneously.

Key Principles of Onda Lifting

Onda Lifting uses 3mm and 7mm handpieces.

3mm handpiece: Delivers energy to the boundary between the dermis and subcutaneous fat.

When heat is applied at this depth, it stimulates the production of collagen and elastin fibers, promotes hyaluronic acid synthesis, and contracts existing collagen, resulting in an immediate skin tightening effect.

Additionally, edematous fat loses water, leading to immediate changes in contour.

7mm handpiece: This handpiece reaches deep into the subcutaneous fat layer, selectively destroying fat cell membranes and inducing their demise.

Damaged fat cells are expelled through the lymphatic system, leading to a contouring effect. Changes begin in 2-3 weeks, contour changes are visible after 4 weeks, peak effect at 6 weeks. Subsequently, the destroyed fat cells do not regenerate, making the results semi-permanent.

It also immediately contracts the retaining ligaments, providing an instant lifting effect.

Temperature Control: Collagen in the dermal layer is induced to contract at approximately 60-65 degrees Celsius. To reach this optimal temperature, a technique of slowly moving the handpiece and accumulating heat is crucial.

Water-Selective Absorption Principle: Microwaves have the characteristic of being absorbed only by water. This means they generate heat primarily in fat cells and the water layers within the dermis, with minimal stimulation to nerves and blood vessels. Therefore, safe lifting procedures with less pain and a lower risk of side effects are possible.

Recommended Liftings to Combine With

At Kkeut Clinic, Onda Lifting can be performed alone, but combining it with Shurink (targeting the fascial layer) or Oligio (RF tightening) maximizes the synergistic effect.

Especially when procedures are performed on the same day, the heat accumulation time is reduced, allowing for higher satisfaction.

A Message from the Chief Director

At Kkeut Clinic, we perform multiple Onda Lifting procedures every day.

However, the lifting design for each individual is uniquely tailored.

As the chief director, we stay behind after procedures to contemplate how to create even better lifting results.

This is because we believe true lifting isn't merely operating a device, but understanding the skin's texture and flow, and then designing contour changes within that understanding.

Onda Lifting: The difference lies not in the device, but in the hands of the practitioner.

Experience it at Kkeut Clinic.

Onda Lifting: Why Does It Have Immediate Effects?

Onda Lifting uses microwave energy to concentrate heat exclusively at 3mm and 7mm depths within the skin.

During this process, collagen fibers are rapidly heated to over 65 degrees Celsius, causing immediate contraction,

allowing you to visually confirm the lifting effect immediately after the procedure.

Without the need to gradually wait for changes like with traditional radiofrequency lifting,

the biggest differentiator of Onda Lifting is the ability to feel elasticity and lifting immediately.

We highly recommend it for those seeking rapid results.

Kkeut Clinic Onda Lifting

1. Pre-procedure Design + Handpiece Strategy Planning

At Kkeut Clinic, precise pre-procedure design is key.

After a direct consultation, the director comprehensively analyzes skin elasticity, fat distribution, presence of volume, and lifting direction to design the treatment areas.

Accordingly, the 3mm handpiece (focused on dermal stimulation) and the 7mm handpiece (focused on targeting the fat layer) are appropriately positioned for each area.

It's not just a simple procedure, but a design-centric, strategic lifting.

2. Sufficient Energy Assurance + Precise Settings

Total energy is crucial for Onda Lifting.

Kkeut Clinic offers customized procedures from 60,000 to over 120,000 Joules, precisely planning the treatment time commensurate with the amount and cooling strategies to prevent overheating.

3. Handpiece Speed and Heat Accumulation Control

For Onda, heat accumulation is equivalent to lifting.

Kkeut Clinic performs procedures following a routine of maintaining a slow speed for initial heat accumulation, then transitioning to a faster speed in the later stages to minimize the risk of burns.

This control setting requires accumulated experience from the practitioner.

4. Customized Handpiece Distribution and Shot Strategy

The shot strategy must differ for individuals with chubby cheeks versus those with only reduced elasticity.

Kkeuthan Clinic adjusts the ratio and uses 3mm and 7mm handpieces depending on the volume, fat location, and skin thickness.

For example, areas with a lot of fat, like the jawline, are primarily treated with a 7mm handpiece, while areas immediately below the cheekbones where hollowness is a concern are primarily treated with a 3mm handpiece.

Upgrading from simple irradiation to a customized distribution strategy.

5. Design by Chief Directors, Continuous Deliberation and Research

Kkeuthan Clinic performs so many Onda Lifting procedures that we treat with Onda during every appointment slot each day.

However, the design is always different.

Even outside of consultation hours, our chief directors simulate changes in patients' faces and repeatedly test energy settings and handpiece placements that maximize effectiveness.

Onda Lifting, anyone can perform it, but the results vary greatly depending on who designs the treatment.

Onda Lifting is not just a simple device procedure; it's a lifting treatment completed by a person.

Recommended for

• 01. Those who want to improve double chin, jowls, and jawline definition
• 02. Those with deep nasolabial folds and sagging skin
• 03. Those concerned about facial contour and elasticity that previous lifting treatments couldn't fully address
• 04. Individuals in their 30s-50s with a combination of fat and reduced elasticity
• 05. Those who desire a lifting treatment without pain or downtime

Treatment Advantages

• 01. Excellent cooling function results in virtually no pain
• 02. Immediate tightening effect
• 03. Return to daily life immediately after the procedure

Treatment Process

• STEP 01. 1:1 consultation after cleansing
• STEP 02. Oil application
• STEP 03. Onda Lifting procedure

Post-Treatment Precautions

• ㆍYou can wash your face and apply makeup after the procedure.
• ㆍPlease avoid saunas, jjimjilbangs (Korean bathhouses), alcohol, and smoking for about 1 week.
• ㆍYou may experience dryness due to heat. Please apply plenty of moisturizer.
• ㆍApply sunscreen to protect your skin when going outdoors.